Poker Products

Banner
Poker Table Photos - Husband and wife build
This was both of our first time with any sort of wood work! Ordered our foam for the playing surface, the rail, and the table fabric from this website( great customer service and great products) our vinyl we got from Joanns. We followed the raised poker table steps all the way up to raising the rail then we took our own route and started impervising and about 200 trips to Home Depot. The inside and outside is nailed with white hardboard, then we got black vinyl edging from the flooring department at Home Depot and used vinyl adheasive to glue it onto the baseboard. For the raised rail we used the scrap plywood and cut out spacers 4" long and 2" wide. We cut out roughly 25 of them and spaced them around the playing surface. We used 90 degree cabinet brackets from Home Depot to connect the risers to the playing surface. Cup holders will be installed under table, they will fold out when in use then fold back under the table when not. Will be installing charge ports under the table also. For being beginners and our first ever wood work build are very stasifed how this table turned out!

IMG_6009
17190366_10154322016626161_385991558765822037_n
17098672_10154322016526161_6775064694013047134_n
17191389_10154322016496161_5063566050093140412_n
17190945_10154322016411161_8432255933492996669_n
17202721_10154322016341161_6728142894799255507_n
17200881_10154322016396161_8289171278850621824_n
17200988_10154322016306161_1005855175017053248_n
17203170_10154322016311161_4004704612692989301_n
17098150_10154322016271161_3486813501215068960_n
17191135_10154324911311161_7173893507267386754_n
17200904_10154324911426161_1920845361859584181_n
17191195_10154324911421161_3803961451996887967_n
17190573_10154324911316161_5869346193311003675_n
17201031_10154324911301161_694060608675337651_n
 Comments

Please login or register to post comments.

 
btm